Yealink MeetingEye 600 Administrator's Manual page 246

Parameter
Abnormal Call Answering
Configuring the Safe Mode Call
The safe mode call feature is used to verify whether the incoming H.323 call is coming from an H.323
endpoint.
Procedure
1. On your web user interface, go to Setting > Call Features.
2. Configure and save the following settings:
Parameter
Safe Mode Call
Description
Specify the account type
for answering abnormal SIP
incoming calls.
The supported types are as
follows:
Disabled—reject the
•
abnormal SIP incoming
calls.
• Account Answer—use
the registered SIP account
to answer the abnormal
SIP incoming calls.
• IP Call Answer—use IP
address to answer the
abnormal SIP incoming
calls.
Default: IP Call Answer.
Description
Enable or disable the safe
mode call feature.
The supported types are as
follows:
Off—answer incoming
•
H.323 calls directly without
validation.
On—verify whether the
•
incoming H.323 call is
coming from an H.323
endpoint. If it is, the
system will answer it. If
not, the incoming call will
be rejected.
Default: Disabled.
| Configuring the Security Features | 246
Configuration Method
Web user interface
Configuration Method
Web user interface