Changing The Video Input Source; Configuring Hdmi Extended Display By Vp59 - Yealink MeetingEye 600 Administrator's Manual

Parameter
Preview Local

Changing the Video Input Source

The system supports the video input sources both from the camera and the PC. If you do not share the
contents during the call, the video input source is camera by default; if not, switch the video input source
to Camera+PC to zoom in the screen You can change the video input source and select the content to be
displayed on the screen. This feature is not applicable to VP59.
Procedure
Do one of the following during a call:
• On your web user interface, go to HomeInput Choose.
• On your remote control, press the OK key to open Talk Menu and select Input Choose.
• If you select PC, the remote video image is displayed in large window, and the PC content is
displayed in small window (Picture-in-Picture mode).
• If you select Camera+PC, the PC content is displayed in large window, and other video images
are displayed in small window.
If you select Camera, the remote video image is displayed in large window, and the local video
•
image is displayed in small window (Picture-in-Picture mode).

Configuring HDMI Extended Display by VP59

After you enable the HDMI feature on VP59, if you connect a monitor to the phone during a video call, the
video images of the remote party and the shared content are displayed on the monitor, and the call control
page is displayed on phone screen.
Procedure
1. On your phone, tap Setting > Network & Connection.
2. Configure and save the following settings:
Description
Enable or disable to view
the local thumbnail image
by adjusting camera when
there is no local screen in the
current layout.
On-You can view the local
•
thumbnail image when you
adjust the camera.
Off-You can not view the
•
local thumbnail image
when you adjust the
camera.
Default: On.
| Configuring Video Settings | 168
Configuration Method
Web user interface