Toshiba e-STUDIO556 Service Manual page 498

(5) Open the inlet cover, and insert two sheets of paper (push them in by hand until the leading edge
of the sheets butts against the paper positioning plate).
(6) Close the inlet door while holding it down with your hand.
(7) Press SW2 on the saddle stitcher controller PCB.
• The saddle stitcher unit will "stitch" the sheets, and fold and deliver the stack automatically.
e-STUDIO556/656/756/856/557/657/757/857
ADJUSTMENT
Sheets Mark
Fig. 6-112
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
6 - 94