Toshiba e-STUDIO556 Service Manual page 459

6.10 Adjustment of the Paper Feeding System
6.10.1 Sheet sideways deviation caused by paper feeding
<Procedure>
The center of the printed image shifts to the front
side. -> Move the guide to the front side when
feeding paper from the bypass tray or the drawer.
Move the front cover to the rear side when
feeding paper from the Tandem LCF. (Arrow (A)
direction in the lower figure).
Feeding direction
Fig. 6-38
Bypass feeding
1. Loosen the screen.
2. Move the entire guide to the front or rear side.
3. Tighten the screw.
( A ) ( B )
Fig. 6-40
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
[ Rear ]
Center
[ Front ]
6 - 55
The center of the printed image shifts to the rear
side. -> Move the guide to the rear side when
feeding paper from the bypass tray or the drawer.
Move the front cover to the front side when
feeding paper from the Tandem LCF. (Arrow (B)
direction in the lower figure).
[ Rear ]
Feeding direction
[ Front ]
Fig. 6-39
Drawer feeding
1. Loosen 2 screws.
2. Move the entire guide to the front or rear side.
3. Tighten the screws.
( B )
( A )
Fig. 6-41
e-STUDIO556/656/756/856/557/657/757/857
6
Center
ADJUSTMENT