Toshiba e-STUDIO556 Service Manual page 729

Replace parts
[2E11] Insufficient memory capacity for USB storage
Classification
File sharing related error
Check item
Setting
Replace parts
[2E12] Message reception error in USB storage
[2E13] Message transmission error in USB storage
Classification
File sharing related error
Check item
Setting
Replace parts
[2E14] Invalid parameter for USB storage
Classification
File sharing related error
Check item
Setting
Replace parts
[2E15] Exceeding the maximum size for file sharing
Classification
File sharing related error
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Memory in the USB folder is not sufficient.
If there is a job in progress, perform the job in error again after the job in
progress is finished. If the error still occurs, turn the power OFF and then
back ON, and then perform the job in error again.
Job status is invalid.
Turn the power OFF and then back ON. Perform the job in error again.
The specified parameter is invalid.
If a template is being used, recreate the template. If the error still occurs,
turn the power OFF and then back ON. Perform the job in error again.
There are too many files in the folder.
8 - 177
Remarks
Error item
Measures
Remarks
Error item
Measures
Remarks
Error item
Measures
Remarks
Error item
e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
8