Download Print this page

Toshiba e-STUDIO556 Service Manual page 326

Multifunctional digital systems
Hide thumbs Also See for e-STUDIO556:

Advertisement

(3)
Disconnect 1 connector.
(4)
Remove 3 screws and take off the read
motor.
4.13.29 Read motor bracket
(1)
Take off the RADF rear cover.
( P.4-136 "4.13.3 RADF rear cover")
(2)
Loosen 1 screw.
(3)
Disconnect 1 connector.
(4)
Remove 3 screws and take off the read
motor bracket with the motor.
Note:
When installing the read motor bracket, refix
the loosened screw and tighten the belt
tension.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 162
Connector
Fig. 4-458
Fig. 4-459
Connector
Fig. 4-460

Advertisement

loading