Toshiba e-STUDIO556 Service Manual page 414

6.3.3 Printer related adjustment
The printer related adjustment is performed by using the printed out grid pattern.
1
Adjustment
Tolerance
A 200 ± 0.5mm
B 52 ± 0.5mm
C 200 ± 0.5mm
D 52 ± 0.5mm
E 52 ± 0.5mm
e-STUDIO556/656/756/856/557/657/757/857
ADJUSTMENT
A
6
B, E
Fig. 6-13 Grid pattern
Refer to "[A] Reproduction ratio of primary scanning direction (Fine adjustment of
polygonal motor rotation speed (Printer))"
Refer to "[B] Primary scanning data laser writing start position (Printer)"
Refer to "[C] Reproduction ratio of secondary scanning direction (Fine adjustment
of transfer belt motor rotation speed (Copier/Printer))"
Refer to "[D] Secondary scanning data laser writing start position"
Refer to "[E] Primary scanning data laser writing start position at duplexing"
6 - 10
21
Detail of adjustment
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved