Toshiba e-STUDIO556 Service Manual page 509

• The center of the printed image shifts to the rear side:
Move the adjustment board to the rear side (Arrow (A) in the upper figure).
Note:
After the tray position adjustment, re-adjust the front cover position. Adjustment: loosen 4
screws and slide the front cover to adjust the gap between the front and upper cover, and the
front and right cover to 3 mm respectively.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
[ Rear ]
Feeding direction
[ Front ]
Fig. 6-120
Front cover
Fig. 6-121
6 - 105
Center
e-STUDIO556/656/756/856/557/657/757/857
ADJUSTMENT
6