5.2
Service UI
5.2.1
Overview
The following self-diagnostic modes can be used with Service UI on the touch panel of the control
panel.
•
04 TEST PRINT MODE
•
05 ADJUSTMENT MODE
•
08 SETTING MODE
•
6S PM SUPPORT MODE
•
9S LIST PRINT MODE
•
FAX LIST PRINT MODE
Note:
Not all codes of the self-diagnostic mode can be used with Service UI. Refer to "15. SELF-
DIAGNOSIS CODE (03/04/05/08 CODE)" for the codes available with Service UI.
5.2.2
Login procedure
[A] In the normal mode
(1)
Turn the power ON.
(2)
Press the [USER FUNCTIONS] button.
(3)
With the [USER FUNCTIONS] menu displayed, enter the Service Mode password provided
during product training.
(4)
Enter the user name and password on the SERVICE TECHNICIAN PASSWORD screen, then
press [OK]. They are set by default as follows:
* User Name: Service / Password: None
e-STUDIO556/656/756/856/557/657/757/857
SELF-DIAGNOSTIC MODE
Fig. 5-2
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
5 - 4