Toshiba e-STUDIO556 Service Manual page 121

[ 3 ] Driving
The drive of each motor in the paper feeding area activates the paper transfer roller as follows.
Feeding motor Timing belt
( M20 )
Gear, Pulley
Registration motor
( M16 )
Transport motor
( M17 )
Tray-up motor-1
( M21 )
Tray-up motor-2
( M22 ) ( * For JPC model )
Tandem LCF Tray-up motor
( M41 ) ( * Except for JPC model )
Tandem LCF end fence motor
( M42 ) ( * Except for JPC model )
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
[ Feeding area of the drawer or tandem LCF ]
Drawer feed clutch
( CLT6, 8, 10, 12 )
Drawer pickup roller
Drawer feed roller
Drawer separation roller
[ Bypass feeding area ]
Gear
Bypass feed clutch
( CLT4 )
Bypass pickup roller
Bypass Transport roller
Bypass separation roller
Timing belt Registration roller
Pulley
Timing belt Intermediate transport roller
Pulley
Tray in the first and second drawer
Tray in the third and fourth drawer
Tray of the Tandem LCF
Gear, Timing belt
3 - 75
Gear Drawer transport clutch
( CLT5, 7, 9, 11 )
Transport roller
End fence
e-STUDIO556/656/756/856/557/657/757/857
OUTLINE OF THE MACHINE
3