Toshiba e-STUDIO556 Service Manual page 340

(3) Remove 2 screws and take off the sensor
bracket.
(4) Disconnect 1 connector. Release 2 latches
and take off the original tray sensor.
4.13.48 Original tray width sensor (SR2)
(1) Take off the original reverse tray.
( P.4-139 "4.13.7 Original reverse tray")
(2) Remove 2 screws and release 8 latches to
take off the original side guide unit.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 176
Fig. 4-499
Fig. 4-500
Fig. 4-501