Toshiba e-STUDIO556 Service Manual page 335

4.13.38 RADF opening/closing sensor (SR15)
(1) Take off the RADF rear cover.
( P.4-181 "4.13.56 RADF board bracket")
(2) Open the RADF and disconnect 1 connector.
(3) Release 2 latches and take off the RADF
opening/closing sensor.
4.13.39 Original empty sensor (SR3)
(1) Open the original jam access cover.
(2) Remove 4 screws and take off the sensor
bracket.
(3) Disconnect 1 connector. Release 2 latches
and take off the original empty sensor.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-484
Fig. 4-485
Original empty sensor
Fig. 4-486
e-STUDIO556/656/756/856/557/657/757/857
4 - 171
DISASSEMBLY AND REPLACEMENT
4