Toshiba e-STUDIO556 Service Manual page 285

(5) Remove the spring to take off the upper
separation fingers.
4.11.6 Lower separation finger unit / Lower separation finger
(1) Take off the fuser unit.
( P.4-115 "4.11.2 Fuser unit")
(2) Remove 2 screws and open the lower
separation finger unit.
(3) Remove the spring to take off the lower
separation fingers.
4.11.7 Fuser roller front/center/rear thermistor (THM1 / THM 2 / THM 3),
Fuser roller center/side thermostat (THMO1 / THMO2)
(1) Take off the fuser unit.
( P.4-115 "4.11.2 Fuser unit")
(2) Take off the cleaning web unit.
( P.4-117 "4.11.3 Cleaning web unit /
Cleaning web")
(3) Loosen 2 pressure screws completely.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Spring
Upper separation finger
Fig. 4-335
Lower separation finger
Fig. 4-336
Pressure screw
Fig. 4-337
e-STUDIO556/656/756/856/557/657/757/857
4 - 121
Spring
DISASSEMBLY AND REPLACEMENT
4