Toshiba e-STUDIO556 Service Manual page 198

4.3.20 Platen sensor (S53/S54) (e-STUDIO557/657/757/857)
(1) Take off the top rear cover.
( P.4-3 "4.1.6 Top rear cover")
(2) Take off the rear cover.
( P.4-5 "4.1.13 Rear cover")
(3) Remove 1 clip [2] to take off the actuator [1].
(4) Disconnect 1 connector and release 2
latches. Then take off the platen sensor [1].
(5) Disconnect 1 connector and release 2
latches. Then take off the platen sensor [2].
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
[1]
[1]
[2]
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 34
[2]
Fig. 4-94
Fig. 4-95