Toshiba e-STUDIO556 Service Manual page 102

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO556:

Scanning Section

General Description

In the scanning section of this equipment, the surface of an original is irradiated with a direct light and

the reflected light is led through mirrors, a lens and a slit to CCD where optical-to-electrical conversion

is performed, converting the optical image data into an electrical (analog) signal. This analog signal is

changed to a digital signal, which then undertakes various corrective processes necessary for image

formation. After that, arithmetic operation is performed on the digital signal, which is then transmitted to

the data writing section.

The color high-speed-drive CCD sensor is used in the equipment to make high-speed-drive and high-

resolution for scanning originals possible.

e-STUDIO556/656/756/856

[1] RADF original glass

[2] Carriage-2

[3] Exposure lamp

[4] Reflector

[5] Carriage-1

[6] Original glass

[7] Drive pulley

[8] Automatic original detection sensor

[10] CCD board

[11] SLG board

e-STUDIO556/656/756/856/557/657/757/857

OUTLINE OF THE MACHINE