Toshiba e-STUDIO556 Service Manual page 240

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO556:

Take out the drum upward.

Be sure to apply patting powder (lubricant) to

the entire surface of the drum when it is

replaced or it is installed/removed from the

Remove 3 screws to take off the flange on

the front side.

Pull out the drum upward.

<<Precaution when installing the drum

Make sure that the gap plate is not caught

with the drum shaft.

Be sure to install the drum shaft and

cleaner frame without a gap.

No foreign matter must be attached on

the cleaner stay.

e-STUDIO556/656/756/856/557/657/757/857

DISASSEMBLY AND REPLACEMENT

Cleaner stay