Toshiba e-STUDIO556 Service Manual page 193

[B] Installing carriage wires
(1) When replacing the carriage wires, refer
illustrations below:
Note:
Adjustment of the carriage wire tension is not
necessary since a certain tension is applied
to the carriage wires by the tension
springs.Make sure the tension applied to the
wire is normal.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
[Front]
Carriage wire
Bracket for carriage-1
Wire pulley
Tension spring
Fig. 4-80
[Rear]
Carriage-2
Carriage wire
Idler pulley
Tension spring
Fig. 4-81
e-STUDIO556/656/756/856/557/657/757/857
4 - 29
Carriage-2
Idler pulley
Hook
Bracket for carriage-1
Hook
Wire pulley
DISASSEMBLY AND REPLACEMENT
4