Toshiba e-STUDIO556 Service Manual page 833

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO556:

Precautions and procedures when replacing the HDD

Replacing ADI-HDD with SATA-HDD is not possible. When replacing ADI-HDD, replace it with

another ADI-HDD.

When the HDD is replaced, it is necessary to back up the data in the HDD before replacing

and to recover them after replacing.

To maintain the security, ask users to perform the backup/restore for users' data/information

in the HDD. The service technician can perform them only when users permit it.

Some data in the HDD cannot be backed up and can be kept only on the paper.

When [5]+[C], [3], [1] is performed, the HDD self-certificate is not available, so the SSL-

related setting becomes disabled.

Do not replace the HDD and the SRAM board together.

When the HDD is replaced, do not perform SRAM data formatting (Clear SRAM) before

thenormal start-up.

When the HDD is replaced, do not restore the back-up file before the normal start-up.

A procedure for replacing the HDD is shown below.

[A] Back up data in HDD

[B] Print out "FUNCTION LIST FOR MAINTENANCE"

[C] Print out "FUNCTION" list

[D] Erase HDD

[E] Replace/Format HDD

[F] Reset user's setting item and restore data/information

[G] Reset "FUNCTION LIST FOR MAINTENANCE"

[H] Reset "FUNCTION" list

[I] Adjust image quality

Setting completed

e-STUDIO556/656/756/856/557/657/757/857

REPLACEMENT OF PC BOARDS / HDD