Toshiba e-STUDIO556 Service Manual page 31

[ 3 ] Copy speed (Copies/min.)
The measuring conditions of the copy speed are as follows.
• Continuous copying by placing a single-sided original on the original glass.
• "-" indicates "Not acceptable".
• The LCF (optional) is available only for A4 and LT.
• The Tandem LCF is available only for A4 and LT.
[ 3-1 ] Plain paper
2
• Plain paper: 64 g/m to 80 g/m
* Accuracy: Within ±2 sheets (Bypass feed) / Within ±1 sheet (Other paper sources)
* Values may vary depending on its use condition and environment.
* When the RADF is used, each copy speed per minute of e-STUDIO556/656/756/856 has reached
55/65/75/85 sheets. These copy speeds can be realized only in the following conditions.
• Original: A4/LT / 1 sheet
• Copy mode: A4/LT / Plain paper / Automatic Paper Selection - OFF / Automatic Copy Density -
OFF
• Number of copy set: 55 or more / 65 or more / 75 or more / 85 or more
• Reproduction ratio: 100%
e-STUDIO556/557
Paper supply
Paper size
A4, LT, B5 Top side
discharging
Back side
discharging
A5-R, ST-R Top side
discharging
Back side
discharging
A4-R, B5-R, LT- Top side
R discharging
Back side
discharging
B4, LG, FOLIO, Top side
COMPUTER discharging
Back side
discharging
A3, LD Top side
discharging
Back side
discharging
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
2
/ 17 lb. Bond to 21.3 lb. Bond
Bypass feed
Drawer
Size specified
55 45
55 45
55 45
55 45
44 37
44 37
38 32
38 32
34 28
32 28
2 - 5
Option LCF
Size not
specified
28 55
28 55
28 -
28 -
28 -
28 -
28 -
28 -
28 -
28 -
e-STUDIO556/656/756/856/557/657/757/857
SPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES
2
Tandem LCF
55
55
-
-
-
-
-
-
-
-