Toshiba e-STUDIO556 Service Manual page 939

[B] Confirmation of the updated data
After the updating is completed, check each data version in Setting Mode (08) to confirm that the data
were overwritten properly.
 P.11-62 "11.7 Confirmation of the updated data"
Important:
If the exposure lamp blinks twice at the time of start-up and a "C270" error occurs, the model of
the scanner ROM updated may be incorrect.
Check the model of the scanner ROM and retry updating.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856/557/657/757/857
11 - 49
FIRMWARE UPDATING
11