Toshiba e-STUDIO556 Service Manual page 606

Relation between the jamming area and the corresponding sensors and covers
Jamming area
Registration area
Exit/Reverse area
Reverse transport area
Paper feeding area
[E551] Paper remaining jam at paper transport path
[E552] Paper remaining jam at paper transport path
Classification
Paper transport jam
Check item
Jamming transport path
Feed or transport roller possibly
causing multiple feeding
Sensor in the jamming area
LGC board
Replace parts
Feed or transport roller possibly
causing multiple feeding
e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
Sensor
Registration sensor
Exit sensor
Reverse sensor-1
Reverse sensor-2
Fuser transport sensor
Horizontal transport sensor-1
Horizontal transport sensor-2
Horizontal transport sensor-3
1st drawer feed sensor
2nd drawer feed sensor
3rd drawer / tandem LCF feed sensor
4th drawer feed sensor
1st drawer transport sensor
2nd drawer transport sensor
3rd drawer / tandem LCF transport sensor
4th drawer transport sensor
Intermediate transport sensor
The paper is detected on the transport path when a service call occurs.
(E551)
The paper is detected on the transport path after the cover is opened and
closed. (E552)
Open the cover of the unit/area whose picture is flashing on the control
panel and remove any paper on the transport path.
Check the feed roller.
• Sensor check (Refer to the table below)
• Harness check
• Connector check
• Connector check
• Board check
8 - 54
Test mode / Input check
03-[FAX]ON/[4]/[E]
03-[FAX]OFF/[7]/[B]
03-[FAX]OFF/[7]/[E]
03-[FAX]OFF/[7]/[D]
03-[FAX]OFF/[7]/[C]
03-[FAX]OFF/[9]/[F]
03-[FAX]OFF/[9]/[G]
03-[FAX]OFF/[9]/[H]
03-[FAX]OFF/[1]/[D]
03-[FAX]OFF/[2]/[D]
03-[FAX]OFF/[3]/[D]
03-[FAX]OFF/[4]/[D]
03-[FAX]OFF/[1]/[C]
03-[FAX]OFF/[2]/[C]
03-[FAX]OFF/[3]/[C]
03-[FAX]OFF/[4]/[C]
03-[FAX]OFF/[1]/[A]
(when a service call occurs)
(when the cover is closed)
Error item
Measures
Remarks
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved