Toshiba e-STUDIO556 Service Manual page 176

(3) Remove 5 screws to take off the lens cover
[1].
4.3.3 SLG board cooling fan (M23)
(1) Take off the lens cover.
( P.4-11 "4.3.2 Lens cover")
(2) Disconnect 1 connector and remove 2
screws to take off the SLG board cooling fan.
4.3.4 Automatic original detection sensor (APS sensor) (S1 / S2 / S3 /
S4 / S5) (e-STUDIO556/656/756/856)
(1) Take off the lens cover.
( P.4-11 "4.3.2 Lens cover")
(2) Disconnect 1 connector, remove 1 screw and
take off the APS sensor.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 12
[1]
Fig. 4-31
SLG board cooling fan
Fig. 4-32
Fig. 4-33