Toshiba e-STUDIO556 Service Manual page 319

(4) Loosen 1 screw.
(5) Remove 1 screw, 1 pulley, 1 bearing and 1
timing belt.
(6) Take off the reading end guide.
( P.4-142 "4.13.11 Exit guide / Exit/reverse
guide / Reading end guide")
(7) Take off the reading end roller.
Note:
When installing the reading end roller, refix
the loosened screw and tighten the belt
tension.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-436
Timing belt
Bearing
Pulley
Fig. 4-437
Fig. 4-438
e-STUDIO556/656/756/856/557/657/757/857
4 - 155
DISASSEMBLY AND REPLACEMENT
4