Toshiba e-STUDIO556 Service Manual page 191

(3) Tighten 4 screws securely to fix the lens unit
while pushing it to the rear side.
4.3.14 Scanning section control PC board (SLG) (e-STUDIO556/656/756/
856)
(1) Take off the lens cover.
( P.4-11 "4.3.2 Lens cover")
(2) Disconnect 10 connectors and remove 4
screws to take off the SLG board.
4.3.15 Carriage wire / Carriage-2
[A] Carriage wire / carriage-2
(1) Take off the carriage-1.
( P.4-13 "4.3.6 Carriage-1 (e-
STUIDIO556/656/756/856)")
(2) Attach the wire holder jigs to the pulleys to
prevent the wires from loosening.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
[ Rear ]
Screw
Screw
[ Front ]
Fig. 4-74
SLG board
Fig. 4-75
Fig. 4-76
e-STUDIO556/656/756/856/557/657/757/857
4 - 27
DISASSEMBLY AND REPLACEMENT
4