Toshiba e-STUDIO556 Service Manual page 334

(3) Remove 1 screw and take off the switch
bracket.
Note:
Before taking off the switch, read the scale.
When reinstalling, align it with the
corresponding position on the scale.
(4) Remove 1 screw and take off the RADF
opening/closing switch.
Note:
Be sure to install the switch so that the arm
comes to the upper side of the switch.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 170
Fig. 4-481
Fig. 4-482
Fig. 4-483