Check item
Registration sensor (S18)
1st drawer transport sensor (S33)
LGC board
Drive unit, Rollers
Replace parts
Registration sensor
1st drawer transport sensor
LGC board
Rollers
[EB60] Paper remaining on the transport path
Classification
Paper transport jam
Check item
Registration sensor (S18)
LGC board
Drive unit, Rollers
Replace parts
Registration sensor
LGC board
Rollers
e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
•
Sensor check (Perform the input check: 03-[FAX]ON/[4]/[E])
•
Connector check
•
Harness check.
•
Sensor check (Perform the input check: 03-[FAX]OFF/[1]/[C])
•
Connector check
•
Harness check.
•
Connector check (CN341)
•
Board check.
•
Gear check
•
Roller check
The multiple feeding of the preceding paper caused the misfeeding of the
upcoming paper (= re-detection after no jam is detected at [EB50])
•
Sensor check (Perform the input check: 03-[FAX]ON/[4]/[E])
•
Connector check
•
Harness check.
•
Connector check (CN341)
•
Board check.
•
Gear check
•
Roller check
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 58
Measures
Remarks
Error item
Measures
Remarks