Toshiba e-STUDIO556 Service Manual page 281

4.11.3 Cleaning web unit / Cleaning web
(1) Remove 2 black screws to take off the
cleaning web unit.
Note:
The cleaning web unit can be taken off
without removing the fuser unit.
(2) Remove 4 E-rings. Then remove 4 bushings
to take off the cleaning web.
(3) Remove 1 E-ring, 1 bushing, 1 E-ring, 2
gears, 1 pin, and 1 bushing in order from the
shaft.
Note:
When the cleaning web has been installed,
be sure that the web is tightly reeled.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Screw
Fig. 4-325
E-ring
E-ring
Fig. 4-326
Fig. 4-327
e-STUDIO556/656/756/856/557/657/757/857
4 - 117
Cleaning web
E-ring
DISASSEMBLY AND REPLACEMENT
4