Toshiba e-STUDIO556 Service Manual page 267

Notes:
1. Change the screw position before
performing the transfer belt deviation
adjustment.
For the adjustment procedure, refer to
( P.6-59 "6.12 Transfer Belt Deviation
Adjustment").
2. When installing the transfer unit, make
sure that the lever comes under the cam.
4.10.2 Transfer belt
(1) Take off the transfer unit.
( P.4-102 "4.10.1 Transfer unit")
(2) Turn the transfer belt unit 90º and pull it out
upward.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
For adjustment
Default
Fig. 4-288
Cam
Fig. 4-289
Transfer belt unit
Fig. 4-290
e-STUDIO556/656/756/856/557/657/757/857
4 - 103
Screw
Lever
Transfer unit
DISASSEMBLY AND REPLACEMENT
4