Toshiba e-STUDIO556 Service Manual page 307

(8) Remove 2 screws.
(9) Take off the unit of exit guide and exit/
reverse guide.
(10) Disconnect 2 connectors, remove 2 screws
and take off the reading end guide.
(11) Remove 1 E-ring, 1 pulley, 1 pin, 1 timing
belt, 1 guide bushing and the bracket.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-400
Fig. 4-401
Reading end guide
Fig. 4-402
Bracket
Fig. 4-403
e-STUDIO556/656/756/856/557/657/757/857
4 - 143
Exit/reverse guide
Exit guide
Guide bushing
Timing belt
Pin Pulley E-ring
DISASSEMBLY AND REPLACEMENT
4