Toshiba e-STUDIO556 Service Manual page 473

(4) Remove 2 screws.
(5) Install 2 positioning pins.
(6) Close the RADF gently and check if the
positioning pins fit the holes on the RADF.
(7) When the RADF is closed, check if the hole
of the adjustment plate on the right-hand
hinge is aligned with the hole on the
equipment. If it is not, turn the adjustment
screw to match the hole.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 6-58
Fig. 6-59
Fig. 6-60
Fig. 6-61
e-STUDIO556/656/756/856/557/657/757/857
6 - 69
6
ADJUSTMENT