•
(05) adjustment value/(08) setting value difference list
05 DIFFERENCE LIST
XXXX-XX-XX XX:XX
CODE
* 2135
2136
*
2137
*
2138
*
The function in which the 05/08 setting value differences between the factory default and the current
value can be printed or output with a CSV file.
The list of differences between the current and the backed-up values of the (05) adjustment and the
(08) setting values is output. "*" is marked on the left side of the code if there is a difference, and "+"
is marked on the left side of the code if there is no backed-up value.
Notes:
•
Back-up data of the factory default are automatically created when the automatic gamma
adjustment of the easy set-up mode has been completed during the unpacking and setting up
of the equipment. The back-up file is retained even if the firmware is upgraded. However, the
file is deleted when 3C-3 (Format HDD) is performed or HDD/SSD is replaced.
•
A back-up file does not exist for equipment to which the easy set-up mode has been
performed before this function is applied.
•
When the easy set-up mode is restarted while a specified value such as 3 and 4 is set for 08-
9022 (Production process management status for easy setup), the back-up file stored during
unpacking and setting up after the completion of the automatic gamma adjustment is deleted,
and another file as of then is newly created.
•
When no back-up file exists:
-
When 9S-121 (122) is performed, the equipment returns to the ready state of the 9S mode
without performing printing.
-
When 9S-221 (222) is performed, the equipment returns to the ready state of the 9S mode
and the error message "The file cannot be saved." appears on the panel.
•
When you want to create a back-up file if one does not exist:
A back-up file can be automatically created after the completion of the automatic gamma
adjustment when the easy set-up mode is restarted while a specified value such as 3 and 4 is
set for 08-9022 (Production process management status for easy setup).
In this case, the current values are stored in the file, but not the ones for unpacking and
setting up.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
S/N : xxxxxxxxx
TOSHIBA e-STUDIOxxx
BACKUP
CURRENT
674
677
333
290
223
208
147
146
Fig. 5-36
5 - 45
FIN S/N : xxxxxxxxx
TOTAL
DF TOTAL
CODE
BACKUP
CURRENT
e-STUDIO556/656/756/856/557/657/757/857
: 9999999
: 9999999
SELF-DIAGNOSTIC MODE
5