Toshiba e-STUDIO556 Service Manual page 331

4.13.34 Original reverse solenoid (SOLR2)
(1) Take off the RADF rear cover.
( P.4-136 "4.13.3 RADF rear cover")
(2) Disconnect 1 connector.
(3) Remove 2 screws and take off the original
reverse solenoid with the bracket.
(4) Remove 2 screws and take off the bracket
from the original reverse solenoid.
Note:
Before taking off the solenoid, read the scale.
When reinstalling, align it with the
corresponding position on the scale.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-472
Fig. 4-473
Fig. 4-474
e-STUDIO556/656/756/856/557/657/757/857
4 - 167
DISASSEMBLY AND REPLACEMENT
4