Toshiba e-STUDIO556 Service Manual page 828

(4) Disconnect 19 connectors and then take off
the switching regulator [1].
Note:
When installing or taking off the switching
regulator, be sure that their harnesses are
not caught.
9.1.13 SRAM board (RAM-S) (e-STUDIO556/656/756/856)
(1) Take off the SYS board cover.
( P.9-1 "9.1.1 SYS board cover")
(2) Release 2 latches and take off the SRAM
board for the SYS board with the case.
(3) Release 2 latches and take off the SRAM
board from the case.
e-STUDIO556/656/756/856/557/657/757/857
REPLACEMENT OF PC BOARDS / HDD
[1]
Latch
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
9 - 10
Fig. 9-27
Latch
Latch
Case
Fig. 9-28
SRAM board
Case
Fig. 9-29