Toshiba e-STUDIO556 Service Manual page 216

(3) Remove 2 E-rings to pull out the transport
rollers from the shaft.
[ 4 ] Intermediate transport sensor (S17)
(1) Disconnect 1 connector.
(2) Take off the sensor while the sensor arm is
pushed downward (the shield plate is pushed
upward).
Note:
When installing the sensor, make sure the
sensor arm moves properly.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
Transport roller
Fig. 4-143
Intermediate transport sensor
Sensor arm
Fig. 4-144
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 52