Toshiba e-STUDIO556 Service Manual page 8

2. Notes
• The installation of gaskets to the RADF, which is described in the Unpacking Instructions, must not
be performed when the equipment is unpacked but must be when it is reinstalled at a userÅfs office.
Do not install the gaskets in the equipment before transporting it because if it is transported with the
gaskets installed, the screws fixing the scanner may contact with the gaskets and thus damage
them.
• The installation of grounding screws in the RADF, which is described in the Unpacking Instructions,
must not be performed when the equipment is unpacked but must be when it is reinstalled at a
user's office.