12.1.4
Cloning procedure
[A] Backup procedure
(1)
Shut down the equipment.
(2)
Connect the USB media to the USB port on the right upper cover.
Note:
Backing up cannot be performed with multiple USB media connected at the same time.
(3)
Turn the power ON while pressing the [5] and [9] buttons simultaneously.
(4)
Enter the password, and then press the [OK].
(If the password is not set for Service, press the [OK] button without entering anything.)
(5)
Select "1. Backup SRAM Data to USB", and then press the [START] button.
(6)
Enter a password (max. 15 characters) set for the backup data.
(7)
"Back Up Completed" is displayed on the LCD screen when the backup has been properly
completed.
(8)
Turn the power OFF and remove the USB media.
e-STUDIO556/656/756/856/557/657/757/857
BACKUP FUNCTION
USB port
USB media
Fig. 12-1
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
12 - 2