Toshiba e-STUDIO556 Service Manual page 310

4.13.14 Pickup roller
(1) Take off the paper feeder unit.
( P.4-145 "4.13.13 Paper feeder unit")
(2) Remove 1 clip. Then pull out the shaft and
take off the pickup roller.
Note:
Make sure you assemble the pickup roller
with the one-way clutch in the correct
direction.
4.13.15 Feed roller
(1) Take off the paper feeder unit.
( P.4-145 "4.13.13 Paper feeder unit")
(2) Remove 1 clip. Then slide the pulley and
remove 1 pin.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
Lock
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 146
Fig. 4-410
Lock
Fig. 4-411
Fig. 4-412