Toshiba e-STUDIO556 Service Manual page 603

[E360] 4th drawer transport jam (paper not reaching 3rd drawer / Tandem LCF transport sensor)
Classification
Paper transport jam
Check item
3rd drawer transport sensor (S45)
4th drawer transport clutch
(CLT11)
LGC board
Drive unit, Rollers
Replace parts
3rd drawer transport sensor
4th drawer transport clutch
LGC board
Rollers
[E510] Transport jam during duplex printing (paper not reaching reverse sensor-2)
Classification
Paper transport jam
Check item
Horizontal transport sensor-1(S19) •
Horizontal transport clutch
(CLT2, 3)
LGC board
Drive unit, Rollers
Replace parts
Horizontal transport sensor-1
Horizontal transport clutch
LGC board
Rollers
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Paper not reaching 3rd drawer / Tandem LCF transport sensor
• Sensor check (Perform the input check: 03-[FAX]OFF/[2]/[D])
• Connector check
• Harness check.
• Clutch check (Perform the output check: 03-225)
• Connector check
• Harness check.
• Connector check (CN328, 350)
• Board check.
• Gear check
• Roller check
Paper not reaching reverse sensor-2
Sensor check (Perform the input check: 03-[FAX]OFF/[9]/[F])
• Connector check
• Harness check.
• Clutch check (Perform the output check: 03-220 / 221)
• Connector check
• Harness check.
• Connector check (CN334, 335)
• Board check.
• Gear check
• Roller check
8 - 51
Error item
Measures
Remarks
Error item
Measures
Remarks
e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
8