Toshiba e-STUDIO556 Service Manual page 247

(10) Remove 1 screw. Take off the separation
finger holder [1] at the middle from the shaft.
(11) Remove 1 E-ring [2] and spring [3]. Take off
the separation finger [4] (rear side) at the
front from the shaft..
Notes:
1. When assembling, be sure to align the
convex portion of the separation finger [1]
with the concave portion of the holder [2].
2. Be sure to hang both edges of the spring
[1] on the hooks of the separation finger
and the holder.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
[1]
Fig. 4-231
[1]
Fig. 4-232
[1]
Fig. 4-233
e-STUDIO556/656/756/856/557/657/757/857
4 - 83
[2]
[3]
[4]
[2]
DISASSEMBLY AND REPLACEMENT
4