Toshiba e-STUDIO556 Service Manual page 249

(3) Disconnect 2 connectors, remove 3 screws
and take off the motor and solenoid with the
bracket.
(4) Remove 2 screws and take off the cleaning
brush drive motor.
(5) Remove 2 screws and take off the drum
separation finger solenoid.
Note:
Pay attention to the size (length) of the
screws. If incorrect ones are used, the motor
could be damaged.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Bracket
Fig. 4-237
Drum separation finger solenoid
Screw
Fig. 4-238
e-STUDIO556/656/756/856/557/657/757/857
4 - 85
Cleaning brush
drive motor
Screw
DISASSEMBLY AND REPLACEMENT
4