Toshiba e-STUDIO556 Service Manual page 826

(5) Remove 4 screws and take off the HDD and
the ground wire from the brackets.
9.1.9 LGC board case
(1) Take off the rear cover.
 P.4-5 "4.1.13 Rear cover"
(2) Take off the LGC board cover.
 P.9-5 "9.1.6 Logic PC board (LGC board)"
(3) Disconnect 20 connectors of the LGC board.
(4) Remove 7 screws and release the hook to
take off the LGC board case with the board.
9.1.10 High-voltage transformer (HVT) / LGC board case
(1) Take off the LGC board cover.
 P.9-5 "9.1.6 Logic PC board (LGC board)"
(2) Disconnect 6 connectors of the high-voltage
transformer.
(3) Remove 1 screw and release 3 locking
supports to take off the high-voltage
transformer.
e-STUDIO556/656/756/856/557/657/757/857
REPLACEMENT OF PC BOARDS / HDD
HDD
Fig. 9-21
LGC board case
Fig. 9-22
Locking support
High-voltage transformer
Fig. 9-23
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
9 - 8
Bracket