Toshiba e-STUDIO556 Service Manual page 315

(4) Remove 1 clip, 1 pulley and 1 bushing.
(5) Remove 1 clip and 1 bushing.
(6) Lift the guide. Take off the original
registration roller.
Note:
When installing the original registration roller,
refix the loosened screw and tighten the belt
tension.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-424
Fig. 4-425
Fig. 4-426
e-STUDIO556/656/756/856/557/657/757/857
4 - 151
Bushing
Pulley Clip
Bushing
Clip
DISASSEMBLY AND REPLACEMENT
4