Toshiba e-STUDIO556 Service Manual page 937

11.5.3 Scanner ROM (e-STUDIO556/656/756/856)
Important:
• Be sure to shut down the equipment before installing and removing the download jig.
• Do not shut down the equipment during the update. The data could be damaged and not be
able to be operated properly.
[A] Update Procedure
(1) Install the ROM to the download jig (K-PWA-DLM-320).
Make sure the direction is correct.
(2) Press the [ON/OFF] button on the control panel to shut down the equipment.
(3) Take off the top right cover.
(4) Take off the right upper cover.
(5) Remove the cover plate.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Top right cover
Fig. 11-17
Right upper cover
Fig. 11-18
e-STUDIO556/656/756/856/557/657/757/857
11 - 47
FIRMWARE UPDATING
11