Toshiba e-STUDIO556 Service Manual page 346

(3) Disconnect 1 connector. Take off the harness
clamp. Remove 4 screws and take off the
RADF board bracket.
4.13.57 Harness guide
(1) Take off the RADF rear cover.
( P.4-136 "4.13.3 RADF rear cover")
(2) Remove the harnesses from the harness
guide.
(3) Remove 3 screws and take off the harness
guide.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 182
Fig. 4-517
Fig. 4-518