Toshiba e-STUDIO556 Service Manual page 322

(3) Remove 1 E-ring, 1 pulley, 1 pin and 1
bushing.
(4) Remove 1 E-ring and 1 bushing and take off
the exit intermediate roller.
4.13.25 Reverse roller
(1) Take off the assembly of the exit guide and
the exit/reverse guide.
( P.4-142 "4.13.11 Exit guide / Exit/reverse
guide / Reading end guide")
(2) Remove 2 screws and take off the 2 leaf
springs.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
Bushing
E-ring
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 158
Bushing
Pulley
Pin
E-ring
Fig. 4-445
Exit intermediate roller
Fig. 4-446
Fig. 4-447