Toshiba e-STUDIO556 Service Manual page 324

4.13.26 Original feed motor (MR1)
(1) Take off the RADF rear cover.
( P.4-136 "4.13.3 RADF rear cover")
(2) Loosen 1 screw.
(3) Disconnect 1 connector, remove 2 screws
and take off the original feed motor.
4.13.27 Original feed motor bracket
(1) Take off the RADF rear cover.
( P.4-136 "4.13.3 RADF rear cover")
(2) Loosen 1 screw.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
Connector
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 160
Fig. 4-452
Fig. 4-453
Fig. 4-454