Toshiba e-STUDIO556 Service Manual page 489

(5) Remove 1 screw, and then screw it
temporarily to an oblong hole located next to
it.
Note:
Make a mark for the installation position of
the bracket in advance.
(6) Move the bracket.
Move to the direction A: The roller life will
become longer (but multiple feeding may
occur frequently).
Move to the direction B: Multiple feeding will
be suppressed (but the roller life may
become shorter).
Note:
Moving the brackets in the same direction by
the same distance is recommended. (e.g.: If
you move one bracket to the direction A by 1
scale, do so for the other.)
(7) Tighten the screw that temporarily screwed.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 6-97
A B
Fig. 6-98
e-STUDIO556/656/756/856/557/657/757/857
6 - 85
B A
ADJUSTMENT
6