Toshiba e-STUDIO556 Service Manual page 919

Notes:
• The display of items on this screen varies depending on the types of data written on the USB
media. Each item is displayed only when each data file is written on the USB media in the
following conditions.
e-STUDIO556/656/756/856
1. SYSTEM FIRMWARE (OS Data)
2. SYSTEM SOFTWARE (HD Data)
e-STUDIO557/657/757/857
1. SYSTEM FIRMWARE (OS Data)
2. SYSTEM SOFTWARE (HD Data)
• If the USB media are not recognized properly, "Set Correct USB Storage Device" message is
displayed. In this case, disconnect the USB media and connect it again within 3 minutes, or
shut down the equipment and connect the device properly. Then repeat the procedure from
(4).
• If any of the error messages below is displayed, confirm if the update program or the data file
in the USB media is correct. Then repeat the procedure from (4)
Error
number
01 Error Loadmodule
02 Machine Model Get Error
03 Copy Data with valid signature in USB Storage
04 Other models ROMDATA TXXXXXXXX
* The version name comes at "xxxx.xxx.x".
05 Copy Signature File in USB Storage
06 Patch and Normal package in one folder of USB
Storage
(6) Select the item with the digital keys.
"*" is displayed next to the selected item. Display or delete the "*" by pressing the number of the
item.
1. SYSTEM FIRMWARE (OS Data)
2. SYSTEM SOFTWARE (HD Data)
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
9
9
Fig. 11-2
Item
T190SFPWxxxx.tar is written. (xxxx is version.)
T190HDPWxxxx.tar is written. (xxxx is version.)
Item
T320SFPWxxxx.tar is written. (xxxx is version.)
T320HDPWxxxx.tar is written. (xxxx is version.)
Error message
Item
Updating OS data
Updating Master data
11 - 29
9
9
Condition
Condition
Cause
Module loading failed.
Model information was not downloaded.
Checking of data file failed.
Master data of other model are stored.
Data files are not stored in the USB
media.
When both the system and patch update
packages are in the USB media.
Remarks
e-STUDIO556/656/756/856/557/657/757/857
FIRMWARE UPDATING
11