Toshiba e-STUDIO556 Service Manual page 186
Multifunctional digital systems
Hide thumbs
Also See for e-STUDIO556:
- Service manual (1094 pages) ,
- Troubleshooting manual (104 pages) ,
- Management manual (282 pages)
Advertisement
Note:
Rotate the drive pulley to move the carriage.
(3)
Remove the seal and then disconnect 1
connector.
(4)
Remove 3 screws, and take off the Exposure
lamp cooling fan-1.
Note:
When installing the fan, do not tighten the
screw too much.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 22
Drive pulley
Fig. 4-60
Seal
Fig. 4-61
Exposure lamp
cooling fan-2
Fig. 4-62
Advertisement
