Toshiba e-STUDIO556 Service Manual page 455

Wire pulley
[Rear side]
Idler pulley
Adjustment of the carriage wire tension is not necessary since a certain tension is applied to the
carriage wires by the tension springs.
Note:
Make sure the tension applied to the wire is normal.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Carriage-2
Carriage wire
Bracket for carriage-1
Hook
Tension spring
Fig. 6-32
Carriage-2
Carriage wire
Tension spring
Fig. 6-33
6 - 51
Idler pulley
Bracket for carriage-1
Hook
Wire pulley
e-STUDIO556/656/756/856/557/657/757/857
6
ADJUSTMENT